Warehouse space calculator
Estimate how large a building you need to hold a given number of pallet positions. Start from positions, rack height and aisle layout, then add the space the rest of the operation takes.
Estimate warehouse floor area
Area per ground position includes its share of the aisle in front of it.
- Total building area (m²)
- 1,300
- Total building area (sq ft)
- 13,993
- Storage floor area (m²)
- 780
- Ground positions
- 300
Calculated in your browser. Nothing you enter is sent or stored.
Track the stock behind your plan.
Keep warehouse quantities, locations and movements in one workspace. Explore sample stock in the demo or start with your own items for free.
Free during open beta. No card. No sales call.
The formula
Ground positions = ceil(pallet positions ÷ rack levels); storage area (m²) = ground positions × floor area per ground position; building area (m²) = storage area ÷ (storage share ÷ 100); building area (sq ft) = building area (m²) × 10.7639
- Pallet positions needed
- Racked positions you need at peak, including headroom. Work it out from stock and pallet quantities with the pallet storage calculator.
- Rack levels
- Pallet levels per rack upright, counting the floor level. Your clear height, sprinklers and forklift reach decide how many you can use.
- Floor area per ground position (m²)
- Floor taken by one pallet footprint on the ground plus its share of the aisle in front of it. Aisle width depends on your forklifts.
- Storage share of the building (%)
- The part of the building used for racked storage. The rest goes to docks, receiving and dispatch staging, packing, offices and charging.
Worked example
Suppose you need 900 pallet positions in racking 4 levels high. That is ceil(900 ÷ 4) = 225 ground positions. Each position is 1.1 m wide and 1.2 m deep (1.32 m²) and faces a 3.0 m aisle it shares with the row opposite, so it gets 1.5 m × 1.1 m = 1.65 m² of aisle. Rounded, that is 3.0 m² per ground position, and 225 × 3.0 = 675 m² of storage area. If storage takes 60% of the building, the total is 675 ÷ (60 ÷ 100) = 1,125 m², or 1,125 × 10.7639 ≈ 12,109 square feet.
Working out floor area per ground position
This is the input that moves the answer most. Measure one bay of your racking: its width divided by the pallets it holds per level, times the rack depth. Then add half the aisle width times that same width, because each aisle serves the rows on both sides. Back-to-back rows share a flue gap, so add half of that too.
Forklift type sets the aisle. Counterbalance trucks need wider aisles than reach trucks, and very narrow aisle equipment needs less still but costs more. Measure your own equipment's turning space rather than using a figure from elsewhere. Cross aisles and fire exits also take floor, and they are easy to forget.
Why storage is only part of the building
Racking never fills the whole floor. Receiving needs room to break down and check inbound pallets before putaway. Dispatch needs a staging area where orders wait for the truck. Packing stations, returns, quarantine, charging, offices and welfare rooms all take their share.
The right storage share depends on how you work. A pallet-in, pallet-out distributor can give most of the building to racking. An e-commerce operation that picks single units and packs parcels needs much more open floor for packing and staging, so its storage share is lower.
When this estimate breaks down
- Mixed storage: shelving for small parts, floor-stacked bulk storage and long goods each need their own calculation.
- Uneven buildings: columns, dock positions and odd shapes rarely let racking run as neatly as the arithmetic assumes.
- Height limits: a rack level only counts if the building's clear height, sprinklers and your forklifts all allow it.
- Growth: an estimate sized for today's peak leaves no room for next year's range. Size for the peak you expect over the lease.
- Local rules: fire, safety and building regulations can set aisle widths and exits. Check them with a qualified designer before you commit.
Using real positions instead of estimates
Once you are running, you can measure instead of estimate. A warehouse system that knows every location and what is in it tells you how many positions are actually full, which is the input this calculator needs next time.
In NextStock, each bin location has a code, a barcode label and a place in the walk sequence, and pallets can be tracked as license plates. That gives you an exact count of positions in use, rather than a guess from walking the floor. See warehouse slotting for how to decide what goes where once the space is set.
Frequently asked questions
Short, direct answers to the questions warehouse teams ask most.
How do I convert square meters to square feet?
Multiply square meters by 10.7639. To go the other way, divide square feet by 10.7639. The calculator shows both so you can compare listings quoted in either unit.
Should I use the building's gross or usable area?
This calculator gives the area you need to use. Listings often quote gross area, which includes walls, columns and sometimes mezzanines or yard. Compare against the usable floor inside the building.
How much extra space should I plan for?
Size pallet positions for your expected peak, with headroom so racking is not completely full, since a full rack slows putaway. Then check the lease length against your growth plan. The right margin depends on how fast your range and volumes are changing.
Your next warehouse move starts here.
Create your own workspace for free, or explore a stocked demo without an account.